Read real customer reviews of the Rogue Gels Universal Kit here.
When the ambient light in a room is green (from fluorescents) and you’re using a green gel on your flash, with the fluorescent light (FL) balance selected on your camera, you will achieve balanced lighting, or all white. White balance, at FL, adjusts the value by 33 units of magenta, which is what is needed to cancel the green effect.
2. In the real world, however, the problem is a bit more subtle and challenging for two very good reasons. First, fluorescent lighting technology has advanced, so instead of the standard value of 30 color correction (CC) units of green light, today’s fluorescent lights are available in a wide range of light temperatures. In fact, some fluorescents have a light temperature warmer than tungsten. (Generally, tungsten light is approximately 2,700–3,300 on the Kelvin color temperature scale, while traditional fluorescents are more than 5,000 K.)
The second challenge to balancing your flash with fluorescent lights is that many interior spaces have a mixture of daylight, incandescent and fluorescent light.
3. When you find yourself in a room that is predominately lit with fluorescent light, your first step toward an accurate balance is to test the light to determine where it is in the broad fluorescent range. Shoot a few images with just the ambient fluorescent light. If they tend towards green, then use the standard green gel. If they appear to be more orange, then the fluorescent light is closer to tungsten, or incandescent. In that case, use a “CTO” gel, which typically balances a flash with incandescent light.
4. In neither case will you find an exact balance because there are so many varieties of color temperatures from fluorescent tubes that your images will either show a little green at one end of the scale or a bit of orange at the tungsten end. Unfortunately, cameras don’t come with a white balance FL setting for every minor difference in color temperature value in today’s fluorescent tubes.
The small difference between your flash and any of the various fluorescent values under which you might find yourself shooting usually only affect the fringes of an image where the light from the flash is diminished. Your subject, which receives most of the flash’s illumination, will typically look very much in balance.
5. The solution for a room with lights of different temperature values is to pick the dominant one, if possible. When daylight is dominant, such as from big windows, then turn off the fluorescents. Balance isn’t required, as you can just shoot with the daylight and use the flash as fill.
6. If the fluorescent light seems to be the primary source of light (for example, any windows are small), then close any blinds or drapes over those windows, or temporarily cover them to eliminate as much of the daylight as possible. Then, you’ll use the standard method of balancing the flash with the fluorescents with a green gel.
7. If it’s not possible to stop a minor source of daylight from entering the room, then try shooting on the opposite of the room, so their effect will be minimized.
8. When a room is lit by all three types of light—fluorescent, daylight and tungsten—and none dominants, then your best solution is to turn off the fluorescents. Then, use the daylight and your flash together, without a gel, as described in #5 above.
9. An excellent gel kit is Rogue Gels from ExpoImaging. They are available as a Universal Kit or Grid Kit. True to its name, the Universal Kit is compatible with almost any flash and many flash accessories. The Grid Kit is meant for use with the Rogue Grid. The Rogue Gel Kits contain 20 filters (1 white diffusing, 5 color correction and 14 artistic color filters). ExpoImaging has made the gels in either kit very versatile, since you can use them together in even more creative combinations.
B&H Photo Video sells the Rogue Gels Universal Kit for $29.95 and the Rogue Gels Grid Kit for $27.95.
Your feedback is important to thousands of PhotographyTalk.com fans and us. If this article is helpful, then please click the Like and Re-Tweet buttons at the top left of this article.
Photo from www.expoimaging.com Copyright © 2004-2011, ExpoImaging, Inc.